Outboard Motors

Product Details:

Enjoy the power of Honda longtail shaft on your boat. The Lontail tail boat machine is easy to start, it gives off minimal odour, smoke and noise and its 4 stroke engine ensures no mixing of oil with fuel.

Product Details:

Using a Honda GX35 Engine, this outboard it ideal for a canoe or kayak. The 35cc engine and leg  weigh less than 25lbs
Light weight makes it ideal for a 10 foot Jon Boat.Ideal for a backup engine on a larger boat.Weights much less than any trolling motor and battery and has a much greater range than a battery.Centrifugal clutch allows engine to idle without prop rotation.

• Adjustable height fits any transom.
•  Honda GX35 T3
• Mini 4-stroke OHC Vertical Engine
• 35cc
• 1.3 Net HP
• 4 stroke engine
• Aluminum prop
• Kill switch on handle
• Air cooled engine - no water pump.
• Fully assembled and ready to operate.

About the Honda engine

 

• 4-stroke - no fuel/oil mixing
• Full 360° "any-side-up" operation - use and store in any position
• Exclusive rotary-slinger lubrication system
• The world's lightest OHC engine
• Approximately half the operating cost of comparable 2-stroke enginesEfficient port configuration and large diameter valves maximize power output
• Lighter, more rigid valve train
• Carburetor equipped with accelerator pump for fast, easy acceleration
• Precision engineered components result in lower vibration
• Lighter piston minimizes vibration
• Ball bearing supported crankshaft for greater stability
• Roller bearing supported connecting rod
• High quality materials, fit, and finish
• Lifetime timing belt design
• Integrated fuel system protection
• Diaphragm carburetor
• Easily accessible spark plug
• Easy to drain and re-fill oil
• No mixing of gas and oil
• Exhaust decompression system
• Unique low inertia design
• CARB and EPA certified
• No catalyst necessary
• Special designs for horizontal and vertical applications available
• Large capacity, multi-chamber exhaust system
• Sophisticated air intake system

Product Details:

SPECIFICATIONS
Honda GX 160  Recoil Start only.

160 CC HONDA ENGINE
DRIVE: Triple-sealed long-life bearing system
SHAFT LENGTH: 65" or 55" SNEAK LITE
PROP: KKK Stainless Super weedless
Weight: 85 lbs.

Product Details:

Additional Information:

• Delivery Time: 5 days
• Packaging Details: Box Packing

Product Details:

Additional Information:

• Delivery Time: 5 Days
• Packaging Details: Box Packing

Product Details:

Additional Information:

• Delivery Time: 5 Days
• Packaging Details: Box Packing

Product Details:

MAXIMUM OUTPUT kW4.4KWFULL THROTTLE OPERATING RANGE rpm4,750-5.750 rpmPISTON DISPLACEMENT cc138ccPROPELLER SELECTION (Pitch) *6 All propellers are the 3-blade type6"-7"MODELDF6ASTARTING SYSTEMManualFUEL DELIVERY SYSTEMCarburetorNO. OF CYLINDERS1BORE xSTROKE mm60.4 X 48mmSTEERINGTillerCHOKEManualOIL PAN CAPACITY Lit.0.7LFUEL TANK CAPACITY Lit.1LIGNITION SYSTEMDigital CDIALTERNATOR12V 5A (Option)ENGINE MOUNTINGBushing TypeTRIM METHODManual Trim and TiltGEAR RATIO :1.92:1GEAR SHIFTF-N-R

Product Details:

Additional Information:

• Delivery Time: 5 days
• Packaging Details: Box Packing

Product Details:

Engine – STALLION  4 stroke, recoil start, petrol 208cc 

PTO Shaft – 19 mm, non-corrosive stainless steel pipe

Engine base – lockable base plate with engine pivoted for up-down movement.

Handle – 0.85 meter, comfortable and easy to use. With engine accelerator lever.

Long shaft – 72 inch length

Propeller – bigger Aluminum propeller of 7 “ dia

Load capacity – approx. 1200 kgs max

Application – tourism boats, transport, fishing etc

Weight- Total 41kgs, Engine 13kgs & longshaft assembly – 28kgs.

Product Details:

PARSUN TWO STROKE 3.6HP OUTBOARD ENGINES FEATURES:

1.High grade marine aluminum alloy for ultimate corrosion protection

2. Tilt & trim with shallow water drive various positions

3. Twist grip throttle control for easy maneuverability & safety

4. Thermostat controlled water cooling system

5. Safety lanyard with emergency shut off

6. Easy forward-neutral gear shifting

7. Vibration reduction system for smooth performance

8. Adjustable steering friction for easier maneuverability

9. Innovative large recoil wheel assists easy starting

10. Carrying handle for moving easily

 
These portable 3.6hp outboard engines may be small in size, but they are big on advanced design ideas, innovative features and big engine performance. These outboards are available in a range of horsepower to fit a variety of applications. Our portables are designed with your convenience in mind, featuring carrying handles and resting pads for easy transport and horizontal storage.

The main different specifications between T2.5/3.6 and T2/2.6:
1.T2.5/3.6 outboard engines displacement is 74.6cc, T2/2.6 is 50cc.
2.T2.5/3.6 gear shift with FORWARD and NEUTRAL position.

 

Product Details:

Product Details:

DESCRIPTION The OHC design is driven by a maintenance-free, low-noise timing belt, which makes the engine more compact and lightweight A special cast iron cylinder sleeve and a high carbon steel, dual ball-bearing crankshaft ensure a high durability and reliability The unique OHC layout combined with a large-capacity muffler reduces engine noise to low levels for better user-friendliness Meets world's most stringent environmental legislation A compact combustion chamber with high thermal efficiency ensures low fuel consumption Engine Bore X Stroke (mm) 46 x 48 mm Compression ratio 9 : 1 Description Code 4-stroke single cylinder, OHV petrol engine, 25?? inclined cylinder, Horizontal shaft Fuel Tank Capacity (L) 1.5 L Ignition System Transistor Type Magneto Ignition Net Power 1.5 kW ( 2 HP ) / 3600 rpm Oil Capacity 0.36 L Starting System Recoil (el. start optional) Dry Weight(Kg) 11.1 kg Displacement 79.7 cm3; Cylinder sleeve type Cast iron sleeve Dimensions (L x W x H) 275 x 342 x 323 mm Fuel cons. at cont. rated power 0.6 L/h - 3600 rpm Cont rated power 1.2 kW ( 1.6 HP ) / 3600 rpm Max. net torque 4.5 N.m / (0.46 kgf.m / 2500 rpm Complete set : engine base, base seize, engine housing, PTO shaft 19.05 mm., handle, long shaft A85 inch and propeller 6.25 inch. Short description : A premium set MAC I is designed to support any purpose of use. They consist of - Engine base   Standard engine base strong, durable to carry a heavy engine - Base seize   Standard base seize durable to hold with any surface on the boat - Engine housing   Long standard engine housing that can carry with any power of engine. - PTO shaft   Long standard PTO shaft 19.05mm. can deal with high power of engine. - Handle   A standard handle 0.85m simple, comfortable and easy to control. -
Long shaft   Long shaft 85 inch, the length suits with this range of engine. - Propeller   Aluminum propeller 6.25 , suitable size of propeller made a boat go faster.

Product Details:

Product Details:

4 Front Corrosion Protection

• A four layer coating process that protects against UV rays and salt water. It provides the best resistance to the harsh conditions found at sea.

Product Details:

Product Details:

Specification SC300 V.2 for 9-13 HP (excluding engine).

-Engine base can be adjustable the position

-Housing’s flange has a grease lubrication system.

-The body is cast as one piece, easy to assemble.

-Automatic chain adjustment system.

-Adjustable base seize, can be used for each type of boat.

-The stopper can adjust the degree and position.

Product Details:

Specifications:

Additional Information:

• Production Capacity: 10
• Delivery Time: 2 days
• Packaging Details: Box Packing

Product Details:

SPECIFICATIONS

Additional Information:

• Production Capacity: 10
• Delivery Time: 2 days

Product Details:

Additional Information:

• Production Capacity: 5
• Delivery Time: 2 days
• Packaging Details: Box PAcking

Product Details:

Outboard 4t engine with GX50 engine block.Short tail from propellor support to propellor shaft.Built in 1.2 litr tank provide 3 hrs of continous use.It contains a metal 3-blade proprellor and wiighs 12Kg.

Product Details:

Features:

• Suitable for 2.5-3.7m boat, infaltable boat or kayak
• Fresh water fishing use
• Economy and efficient outboard motor
• Anti-vibration system
• Tiltable bracket
•  
• Air cooled
• Hi, Low Speed, 360 rotatory
• 2.0HP 2 stroke engine

Specification:

• Engine type: 2 stroke air cooled
• Power: 2.0HP
• Max speed(3 people): 22km/h
• Max rotate speed: 7500rpm
• Idle speed: 3000rpm
• Displacement: 42.5cc
• Fuel tank volume: 1.0L
• Grease volume: 80ml
• Overall size(when tiller arm folded): 105 x 22 x 26cm
• Length of tiller arm: 55cm
• Propeller diameter: 180mm
• Shaft length: 40cm (see photo below)
• G.W: 10.5kg

Additional Information:

• Production Capacity: 10
• Delivery Time: 2 days
• Packaging Details: Box Packing

Product Details:

Intex actually has a trolling motor under their brand.

It provides 40 lb of thrust, which is not much. But it does come with impressive features though:

• extending + tilting handle
• suitable for saltwater and freshwater
• built-in battery power meter
• has an auto-prop oscillation mode, which turns the prop left-right to shake off weeds caught on the propeller

I like the features, but would prefer more than 40 lb of thrust.

The truth is that I don’t have any experience with this motor though, you can read what customers think about it

Product Details:

Air Cooled Outboard, 
Displacement: 196cc
Engine:XP200A(-3),4-stroke,air-cooled,1 Cylinder
Rated output power: 7Hp
Fuel tank capacity:1300ml
Engine oil capacity:600ml
Big Size Propeller,diameter:210mm
Bore*Stroke:70*51cm
Shaft length:70cm
Handle length:46cm

Product Details:

Additional Information:

• Delivery Time: 5 days
• Packaging Details: Box Packing

Product Details:

The Thai's have been making long tail motors for over 60 years and are the International Standard for shallow water outboards.  Do you have shallow muddy water and/or weeds that you can't get through with an outboard or trolling motor?  If so, then our CLP kits are your solution.  These are the four wheel drive of outboards.
CLP is the leading manufacturer of Thailand Long Tails.  CLP is an engineering company that has perfected the design of the Long Tail.  Their design is the most efficient on the market.   They use high grade, polymer and metal alloy bushings unlike the competition which uses WOOD BUSHINGS.  The shaft is mounted to the engine with a perfect, direct fit through the use of an adapter that has splines.   The result of these features creates less vibration or power loss.  The power is transferred to the prop in the most direct and efficient way. 

Product Details:

Enjoy the power of Honda longtail shaft on your boat. The Lontail tail boat machine is easy to start, it gives off minimal odour, smoke and noise and its 4 stroke engine ensures no mixing of oil with fuel.

Product Details:

Honda GX390 MEGA MARINE LBHB Gasoline Marine Engine 16.0 HP FEATURES: This engine is for Marine use only. Fuel Efficiency   Honda GX-Mega Marine engines have OHV combustion that gives high torque and power while minimizing the consumption of gasoline. Powerful and Reliable   GX engine performance is tried and tested (Digital CD and high engine rpm). Easy to Assemble   Aside from the fact that it is lightweight, Honda GX-Mega Marine is very easy to assemble because of its compact design. Easy to Start  Due to its Digital CDIand light pull recoil, starting the engine would be a very easy job. Engine Stop Switch Stainless Muffler Digital CDI with Limiter SPECIFICATIONS: Model GX390T2 (LBHB) Type 4 Stroke, OHV, Single cylinder, inclined 25  Displacement 389 cm  (23.7 cu-in) Bore x stroke 88.0 x 64.0 mm (3.5 x 2.5 in) Net power (SAE J1349) * 1 9.8 kW (13.1 HP) @ 4000 rpm Maximum net torque (SAE J1349) 26.9 N-m (2.74 kgf-m, 19.8 lbf-ft) @ 3000 rpm Compression Ratio 8.2 : 1 Fuel consumption (at continuos rated power) *1 4.7 Liters (1.24 US gal, 1.03 lmp gal)/h Ignition system Transistorized magneto Lubrication system Forced splash Oil capacity 1.1 Liter (1.16 US qt, 0.97 lmp qt) Starting system Recoil starter Air cleaner Grid type Governor Mechanical centrifugal Fuel used Gasoline with a pump octane rating of 86 or higher Fuel tank capacity 6.1 Liters (1.61 US gal, 1.34 lmp gal) INCLUSIONS: 1 x Honda GX390 MEGA MARINE LBHB Gasoline Marine Engine 16.0 HP 1 x Stainless Exhaust Pipe 1 x Spark Plug Wrench 1 x User Manual RD390 Product category : Reduction engine Product sub-category : For reduction engine 13-16 HP (Honda GX390 L-Type) Complete set : engine base, base seize, engine housing, PTO shaft 25.00 mm. (connector 10 points), pole stick, handle, long shaft RD110 inch and propeller 12 inch. Short description : RD set is a direct long shaft that designed for reduction engine which has gear box in the engine. They are suitable for heavy duty. Moreover, we provide a connector 10 points (PTO shaft) for more durable and high performance. (please see video clip in gallery) They consist of -  Engine base   Standard engine base strong, durable to carry a heavy engine -  Base seize   Standard base seize durable to hold with any surface on the boat -  Engine housing   Short standard engine housing that can carry with any power of engine. -  PTO shaft   Short standard PTO shaft 25.00mm (connector 10 points). can deal with any high power of engine. -  Handle   A standard handle 1 metre simple, comfortable and easy to control. -  Long shaft   Long shaft RD110 inch, can support propeller up to 12-13 inch. -  Propeller   propeller 12 , bigger propeller give them more power to do heavy duty. -  Pole stick   Due to high power of reduction engine, they need to support housing, prevent it break down

Product Details:

Product Details:

4 Front Corrosion Protection

• A four layer coating process that protects against UV rays and salt water. It provides the best resistance to the harsh conditions found at sea.

Product Details:

Number Of CylinderSingleCooling SystemWater CooledModelBF10type of engine4 Stroke Over head valve,Vertical twinDisplacement (cm3)222ccBore x Stroke (mm)58 x 42'Full Throttle RPM Range5,000-6,000Rated Power [kW (PS) / rpm]7.4 (10) / 5,500Fuel Delivery1 CarburetorIgnition SystemCDI (Capacitor Discharge Ignition) MagnetoStarting SystemRecoil StarterExhaustUnderwater typeGear Ratio2.33Battery Charging Capacity12V-6ATransom Height (mm)L:563 / X:703Dry Weight (kg) L:44.5 / X:48.5L:44.5 / X:48.5

Product Details:

Features:

•  start-in-gear protection/clutch feature prohibits prop rotation while idling
•  lift/tilt feature for shallow water operation and convenience
•  transistor non-contact electronic ignition for easy starting and improved performance
•  vertical mount engine design for increased power, performance and durability
•  superior carbonation system with primer bulb for increased efficiency
•  twist grip throttle handle and engine stop button for improved response
•  superior outboard anti corrosion system and anodes for increased durability
•  durable cast aluminum construction for superior corrosion protection
•  heavy duty lightweight plastic cast propeller is standard equipment  

Specifications:
Model:vertical axis'single cylinder, air cool, four stroke, hand pull
Max. Output: 6.0HPStroke: 4-stroke
Bore and stroke: 70x45mm
Displacement(ml): 173
Compression ratio: 7.8:1
Max power : 3.2KW/3600rpm
Max torque: 9N.m/2500rpm
Ignition system: transistor non-contact electronic ignition
Startup model: hand pull
Noise exhaust method: muffler out machine and emission directly
Outboard model: spline drivehard shaft, spiral bevel gear
Steering: vertical axis, counterclockwise
Installation method: fix racks or intensify bracket
Propeller configuration counterclockwise: three blade or two blade anti-windTrim and tilt system :manual tilt
Transmission system: centrifugal clutchLubrication method: splash
Lubricating oil: standard
hyperboloid gear oil
Reduction ratio: 22: 15
Built-in fuel tank volume:1.0LOil(engine oil) tank volume:0.6L
Packing dimension: 96 x 50 x 38cm
Weight: 29.0kg 
Pay attention not to test the motor on the ashore but in the water.

Additional Information:

• Production Capacity: 10
• Delivery Time: 2 days
• Packaging Details: Box Packing

Product Details:

• Features 360 degree steering rotation, Standard CDI ignition system for easy starting and improved performance.
• Superior engine water cooling system for improved engine performance.
• Start-In-Gear protection/clutch feature prohibits prop rotation while idling.
• Vertical mount engine design for increased power, performance and durability.

Additional Information:

• Production Capacity: 10
• Delivery Time: 2 Days

Product Details:

Additional Information:

• Production Capacity: 5
• Delivery Time: 2 days
• Packaging Details: Box Packing

Product Details:

Product Details:

• Aluminum Propeller For Thai Longtail Mud Motor.
• Props are 3/4" tapered, keyed shaft designed to fit Thai type long tail shafts..
• 7/5" Diameter.

Product Details:

Parsun 9.9hp outboard engines are the perfect choice for inflatable, small fishing boats and pontoon boats with great operating convenience. PARSUN has been supplying reliable, heavy-duty outboard engines to the most demanding boaters of all : the people who make their living on the water. These outboard engines are designed from the bottom up to take the strain of long continuous hours of hard use.

Additional Information:

• Delivery Time: 2-3 days
• Packaging Details: Box Packing

Product Details:

Type of engine4 Stroke Over head valveCylinderSingle cylinderDisplacement (cm3)127Bore x Stroke (mm)60 x 45Full Throttle RPM Range5,000-5,500Rated Power [kW (PS) / rpm]4.5 (6) / 5,500Cooling System.Water CooledFuel Delivery1 CarburetorIgnition SystemCDI (Capacitor Discharge Ignition) MagnetoStarting SystemRecoil starterExhaustUnderwater typeGear Ratio2.08Battery Charging CapacityN/ATransom Height (mm)L:561Dry Weight (kg)L:27.5

Additional Information:

• Production Capacity: 5
• Delivery Time: 5 days
• Packaging Details: Box Packing

Product Details:

Using a Honda GX35 Engine, this outboard it ideal for a canoe or kayak. The 35cc engine and leg  weigh less than 25lbs
Light weight makes it ideal for a 10 foot Jon Boat.Ideal for a backup engine on a larger boat.Weights much less than any trolling motor and battery and has a much greater range than a battery.Centrifugal clutch allows engine to idle without prop rotation.

• Adjustable height fits any transom.
•  Honda GX35 T3
• Mini 4-stroke OHC Vertical Engine
• 35cc
• 1.3 Net HP
• 4 stroke engine
• Aluminum prop
• Kill switch on handle
• Air cooled engine - no water pump.
• Fully assembled and ready to operate.

About the Honda engine

 

• 4-stroke - no fuel/oil mixing
• Full 360° "any-side-up" operation - use and store in any position
• Exclusive rotary-slinger lubrication system
• The world's lightest OHC engine
• Approximately half the operating cost of comparable 2-stroke enginesEfficient port configuration and large diameter valves maximize power output
• Lighter, more rigid valve train
• Carburetor equipped with accelerator pump for fast, easy acceleration
• Precision engineered components result in lower vibration
• Lighter piston minimizes vibration
• Ball bearing supported crankshaft for greater stability
• Roller bearing supported connecting rod
• High quality materials, fit, and finish
• Lifetime timing belt design
• Integrated fuel system protection
• Diaphragm carburetor
• Easily accessible spark plug
• Easy to drain and re-fill oil
• No mixing of gas and oil
• Exhaust decompression system
• Unique low inertia design
• CARB and EPA certified
• No catalyst necessary
• Special designs for horizontal and vertical applications available
• Large capacity, multi-chamber exhaust system
• Sophisticated air intake system

Product Details:

Product Description

Features:

• 360 degree steering rotation for reverse without gear shifting
• Start-In-Gear protection/clutch feature prohibits prop rotation while idling
• Lift/Tilt feature for shallow water operation and convenience
• Superior engine water cooling system for improved engine performance
• Easy pull off engine cover with push button latch for instant motor access
• Standard CDI ignition system for easy starting and improved performance
• Vertical mount engine design for increased power, performance and durability
• Superior carbonation system with primer bulb
• Twist grip throttle handle and engine stop button for improved response
• Superior outboard anti corrosion system and anodes for increased durability
• Durable cast aluminum construction
• Through the prop exhaust outlet for decreased noise and pollutants
• Heavy duty lightweight aluminum cast propeller.

Product Details:

SPECIFICATIONS
Honda GX 160  Recoil Start only.

160 CC HONDA ENGINE
DRIVE: Triple-sealed long-life bearing system
SHAFT LENGTH: 65" or 55" SNEAK LITE
PROP: KKK Stainless Super weedless
Weight: 85 lbs.